You don’t have to throw away your TV if it doesn’t work. It may even be perfectly functional. It could be an issue with your aerial.
Reception problems
A “no-signal” message usually means that the TV is not receiving any reception, either from the cable or the antenna. You may have a broken television if one TV in your house works, but not another. If both work, it’s likely that the reception is to blame.
Consider the following to check for problems with reception:
Are you sure that the satellite dish and UHF aerial are positioned correctly?
It could be that someone has nudged or blown your TV or satellite dish over, or it was damaged by falling branches or debris.
It can be difficult and dangerous to reposition a TV aerial or satellite dish. Many people have died trying to improve their TV reception. We recommend you ask the TV provider for advice if you feel you need to move your satellite dish or aerial. For TV aerial installation Gloucester, visit a site like https://steveunettaerials.co.uk/
Is the antenna or cable corroded?
Indoor cables can be damaged by normal wear and tear, as well as humidity and rain. Make sure that your aerials and cables are clean and free of rust. Also, make sure that they are securely attached to your TV.
What channel is on?
If a TV station has been taken off the air, you may not get any signal. You can check this by changing the channel!
Set problems
What input is the TV set connected to?
There are many inputs available on modern TVs. Some may be unnecessary for your needs. You can cycle through the inputs on your television using the remote control, or pressing buttons.
Reset the box
Follow these steps to reset your TV and all associated equipment.
- Turn off everything at the wall.
- Verify that all cables and cords are firmly in their place.
- Wait for 60 seconds.
- Connect your TV box to the wall socket (not your television) and turn it on.
- Wait 60 seconds or until all the lights on your TV box stop flashing.
- Reconnect everything and turn the system back on.
It’s not fixed?
Contact a TV aerial repair engineer if you haven’t had any luck and still don’t get a signal on your TV!